Seat
#
Removal
1.
Insert the ignition key into the seat lock,
and turn and hold the key clockwise to
unlock the seat.
2.
Pull the rear of the seat back and up.
#
Installation
1.
Insert the front and rear prongs into the
front and rear stays on the frame.
2.
Push forward and down on the rear of the
seat until it locks in place.
Make sure that the seat is locked securely
in position to pull it up lightly.
The seat locks automatically when installed.
Take care not to lock your key in the
compartment under the seat.
20161220114015_32MJED100_eng_BOOK Page 63 Tuesday, December 20 2016 11:43:47 JST
Removing & Installing Body Components u Seat
Maintenance
60
Front stay
Front
Prong
Rear Prongs
Seat
Seat lock
Ignition key
Rear stays
To Next Page
Loading...
