#
Main Fuse
1.
Remove the seat. 2 P. 60
2.
Disconnect the wire connector of the
starter magnetic switch.
3.
Pull the main fuse out and check for a
blown fuse. Always replace a blown fuse
with a spare fuse of the same rating.
u Spare main fuse is provided in the
starter magnetic switch.
4.
Reinstall parts in the reverse order of
removal.
NOTICE
If a fuse fails repeatedly, you likely have an
electrical problem. Have your motorcycle
inspected by your dealer.
20161220114015_32MJED100_eng_BOOK Page 104 Tuesday, December 20 2016 11:43:47 JST
Electrical Trouble u Blown Fuse
Troubleshooting
101
Starter magnetic
switch
Main fuse
Wire connector
Spare main fuse