#
Inspecting Tread Depth
Inspect the tread wear indicators. If they
become visible, replace the tyres immediately.
For safe riding, you should replace the tyres
when the minimum tread depth is reached.
3WARNING
Riding on tyres that are excessively
worn or improperly inflated can cause a
crash in which you can be seriously hurt
or killed.
Follow all instructions in this owner's
manual regarding tyre inflation and
maintenance.
Germany
German law prohibits use of tyres whose tread
depth is less than 1.6 mm.
Have your tyres replaced by your dealer.
For recommended tyres, air pressure and
minimum tread depth, see “Specifications.”
2 P. 116
Follow these guidelines whenever you replace
tyres.
● Use the recommended tyres or equivalents
of the same size, construction, speed rating,
and load range.
● Have the wheel balanced with Honda
Genuine balance weights or equivalent after
the tyre is installed.
● Do not install a tube inside a tubeless tyre
on this motorcycle. Excessive heat build-up
can cause the tube to burst.
20161220114015_32MJED100_eng_BOOK Page 59 Tuesday, December 20 2016 11:43:47 JST
Maintenance Fundamentals
Maintenance
56
Wear indicator
location mark
To Next Page
Loading...
