Honda CRF50F 2004-2015 - Page 131

Installlhe spong
WIth {/'Ie t ape red
Side facing the push
wd.
ALTERNATOR/CAM CHAIN TENSIONER
INSPECTION
Measure the tensione r spring free length .
SERVICE LIMIT: 100 mm (3.9 in)
Check the push rod for wear or damage.
Measure the push rod a.D.
SERVICE LIMIT: 11.94 mm (0.470 in)
INSTALLATION
Install the cam chain tensionar railer, tensioner arm [~~~ J
and pivot boll.
Tighten the pivot bolt to th e specified torque.
TORQUE: 16 N'm (1.6 kgf.m. 12 IbHt)
Check the sealing washer is in good condition,
replace if necessary.
In stall the push rod , spr ing, washer and seating bolt.
Tighten th e sealing bolt to the specified to rque.
TORQUE: 23 N'm (2 .3 kgf·m. 17 Ibf.ft)
~ ---- BOL TIWASHEA
10-7