Honda CRF50F 2004-2015 - Stator;Flywheel Installation

ALTERNATOR/CAM CHAIN TENSIONER
Remove the crankcase seating bolt and washer .
Fill the push rod with 1 - 2 cm
3
of engine oil through
the filler hole.
Check the sealing washer is in good condition and
install the sealing washer and bolt.
Tighten the bolt securely_
STATOR/FLYWHEEL INSTALLATION
Check the stator base oi l seal for damage . replace if
necessary.
Apply engine oil to the lip of the oil seal.
Apply engine oil to new O-rings. install them into
the crankcase grooves.
Apply engine oil to new D- ring , install it into the sta-
tor base groove.
Be careful not fO Install the stator base and tighten the screws
damage rheOlfseal securely.
lips
10-8