Honda CRF50F 2004-2015 - Page 133

ALTERNATOR/CAM CHAIN TENSIONER
Install th e ignition pulse gener ator and stator as an
assembly.
Install the ignition pulse generator mounting bolts
and wire damp.
Install the stator mounti ng bolts.
Set
the wire grommet into the crankcase groove.
Install the wire clamp and tighten the bolt.
Clean
any oil from the tapered portion of the crank·
shaft and flywheel.
Install the woodruff key into the crankshaft groove.
Install the flywheel by aligni ng the key way in the
flywheel with the woodruff key on the crankshaft.
Install the washer.
10-9