Honda CRF50F 2004-2015 - Page 95

Set the tab on the side cover against the left side of
the stopper on the cylinder head.
Install the 6 mm bolt with a new sealing washer into
the cylinder head and tighten it.
Tighten the two right side cover bolts if the cylinde r
head was disassembled.
TORQUE: 9.8 N'm (1 .0 kgf ·m, 7 Ibf.ftJ
Install
the spark plug cap.
Install the tensioner push rod, spring and sealing
bolt (page 10-7).
Adjust the valve clearance (page 3·10).
Pour the r ecommended engine oil (page 3-1 1).
CYLINDER HEADIVALVES
SEALING BOLT
7-19