Continued
77
uuChild SafetyuSafety of Infants and Small Children
A tether anchorage point is provided behind
each rear seating position.
If you have a child seat that comes with a
tether but can be installed with a seat belt, the
tether may be used for additional security.
1. Locate the appropriate tether anchorage
point and lift the cover.
2. Route the tether strap over the head
restraint. Make sure the strap is not twisted.
3. Secure the tether strap hook to the anchor.
4. Tighten the tether strap as instructed by the
child seat manufacturer.
■
Adding Security with a Tether
1Adding Security with a Tether
Always use a tether for forward-facing child seats
when using the seat belt or lower anchors.
Tether Anchorage Points
CoverAnchor
Other Top Tether Type
in Outer Position
Straight Top Tether Type
in Outer Position
21 INSIGHT-31TXM6200.book 77 ページ 2020年2月5日 水曜日 午前10時0分