HoneyGuaridan A25 User Manual

1
®Press the time button 1®J
©
,the characters
flashes, and then press
or Save button
to set hours and minutes;
t^1to set the currently feed on*^' or off fi.
,setting the following meals.
●Press the Enter key tJto complete setting,then the indicator stops flashing.
●long press the record button
then press display button
the plus button
Intelligent Automatic Pet Feeder
User's Instruction
®Press the key
E]
●Press the Set button
[3
to start recording, release it to stop recording.
to display.
(When recording, place mouth position as close to the microphone as possible to
speak loudly, it can record up to 12 seconds.
●Manual Feeding: Long press the manual key! 1
manual feeding.
f o r a b o u t 2 s e c o n d s t o s t a r t
Precautions
>If this product is not used for long-term, please turn off the power switch and
remove the battery, to avoid electrolyte leakage.
>Wipe it with clean water or soft cleaning aent, after wipping it need to be
completely dry before installing each component.
>Dont rinse the product direcely under the water to avoid leakage and damage
the board.
>Use asoft cloth to wipe the surface of the product.
>Dont disassemble components which can not be removed.
>Indicator: flashing green means set state, flashing red means the weak power
state (you need to replace high-quality alkaline batteries).
>After re-energized or replace the battery, you need to reset the current time
but other settings should remain unchanged.

HoneyGuaridan A25 Specifications

General

Product Type	Automatic Pet Feeder
Programmable	Yes
Real-time Tracking	No
Geo-fence Alerts	No
Mobile App	No
Suitable For	Cats
Battery	3 x D Batteries (Not Included)
Voice Recording	Yes

Summary

Precautions

Safety and Maintenance Guidelines

Covers safe usage, cleaning, and warnings against rinsing or disassembly.

Indicator Light Status

Explains flashing green for set state and flashing red for low battery.

Post-Power/Battery Reset Procedures

Details resetting current time after power or battery replacement.

Operating Instructions

Device Installation Steps

Guides on attaching the storage tank and fixing the cover securely.

Setting Description

Configuring Current Time

Instructions for setting the current hour and minute using buttons.

Programming Feeding Schedules

Steps to set meal times and the quantity of feed for each meal.