LTEM-P Installation and Setup Guide
2
System Features
Basic features of the communicator include:
• Quick connection to Resideo control panels and compatible non-Resideo control panels
• Supports both ECP and Bus connections to compatible control panels
• Power supplied by a 9VDC Power Adapter (included)
• Supports dynamic or static IP addressing, and installs behind firewalls without compromising
network security (provided that the Communication Path includes IP)
• Supports connection to the Internet via Ethernet cable or Wi-Fi
®
(Wi-Fi requires installation of
PROWIFIZW module) – only one method can be used, Ethernet or Wi-Fi, not both
• Reports fire, burg, and status messages via the Internet
• Reports messages via cell as backup to Internet reporting (provided that the Communication Path
includes cell)
• Allows uploading and downloading of VISTA control panel data
• Remote Services allow the end user to access their security system from their computer via a
website. Availability of this service is controlled by the dealer via the web-based programming tool
on the AlarmNet 360 website
• Supports remote control of alarm systems via Remote Services feature
• Multi-function Test switch used to generate test messages, enter Pairing mode (used during Wi-Fi
module installation), and to reboot (reset) the communicator.
STATUS LEDs
To Next Page
Loading...
Need help?
General
