1. Press the push button 3 times quickly.
2. Within 12 seconds of pressing the push button, press the Music button to select the ring for the Secret Knock.
Maintenance
Your doorbell and push button require no maintenance except to periodically change the batteries.
If using the correct batteries, battery life should be approximately:
Up to 2 years for the doorbell; replace with 4 AA alkaline batteries
Up to 2 years for the push button; replace with a CR2032 lithium battery
Low Battery Notification
When the doorbell batteries are low, the LED on the side turns on.
When the push button batteries are low, two beep sounds are heard after the normal tune.
Reset
This process removes all pairings, including the push button that came with this doorbell:
1. Remove the doorbell battery.
2. Press and hold the Setting button, and replace the battery at the same time.
3. The doorbell will beep several times rapidly, and is returned to its factory default settings.
Specifications
Doorbell Push Button
Operating Temperature 23°F to 104°F (-5ºC to 40ºC) -4°F to 122°F (-20ºC to 50ºC)
Honeywell ActivLink™ 916.8 MHz 916.8 MHz
Range (open field) 250 ft. (76 m) 250 ft. (76 m)
Sound Level (typical) 80dBA –
RF Power – <1.2W
Battery Type Input: 4 x AA (1.5 V) alkaline each CR2032
Battery Life (5 activations/day) Up to 2 years Up to 2 years
Rain proof N/A Pass UL1598 rain test.
Troubleshooting
To Next Page
Loading...
Need help?
General
