1. Press and hold the Setting button on the doorbell for three seconds.
The LED on the side turns on with an amber color.
2. Within 20 seconds of pressing the Setting button, wave or make some other kind of motion in front of the motion sensor.
Connect a Push Button
Follow these steps to change the ring for an existing doorbell, too.
1. Press and hold the Setting button on the doorbell for three seconds.
The LED on the side turns on with an amber color.
2. Press the push button.
3. Within 12 seconds of pressing the push button, press the Music button to select the ring for that push button.
Secret Knock
You can set up a Secret Knock that makes a different ring for each push button. The Secret Knock is triggered by pressing the
push button quickly 3 times.
To Next Page
Loading...
