Honeywell Home T6 Pro Installation Instructions

Package Includes:
• T6 Pro Thermostat
• UWP™ Mounting System
• Honeywell Standard Installation
Adapter (J-box adapter)
• Honeywell Decorative Cover Plate –
Small; size 449/64 in x 449/64 in x
11/32 in (121 mm x 121 mm x 9 mm)
• Screws and anchors
• 2 AA Batteries
• Installation Instructions and User
Guide
T6 Pro
Programmable Thermostat
Installation Instructions
Home
Optional Cover Plate installation
NOTE: If Optional Cover Plate is not
required, see “UWP Mounting System
installation” on next page.
Use the Optional Cover Plate when:
• Mounting the thermostat to an
electrical junction box
• Or when you need to cover paint gap
from old thermostat.
1. Separate the Junction Box Adapter
from the Cover Plate. See Figure 1.
2. Mount the Junction Box Adapter to
the wall or an electrical box using any
of the eight screw holes. Insert and
tighten mounting screws supplied with
Cover Plate Kit. Do not overtighten. See
Figure 2. Make sure the Adapter Plate
is level.
3. Attach the UWP by hanging it on the
top hook of the Junction Box Adapter
and then snapping the bottom of the
UWP in place. See Figure 3.
4. Snap the Cover Plate onto the Junction
Box Adapter. See Figure 4.
Use 2x
supplied
screws #6
5/8”
4
3
2
1

Honeywell Home T6 Pro Specifications

General

Model	T6 Pro
Temperature Control	Precise Temperature Control
Backlit	Yes
Operating Modes	Heat, Cool, Auto, Off
Fan Modes	Auto, On, Circulate
Weight	0.5 lbs
Temperature Range	Heat: 40°F to 90°F, Cool: 50°F to 99°F
Warranty	1-Year Limited Warranty
Programmable	Yes
Power Source	Battery or Hardwired
Energy Saving	Yes
Stages	Up to 3 Heat/2 Cool
Smart Features	Remote control via app, Geofencing, Alerts
Dimensions	4.06 in. H x 4.06 in. W x 1.06 in. D
Change Reminders	Filter
Display	Touchscreen
Connectivity	Wi-Fi