Honeywell Home T6 Pro Installation Instructions

7
Fan operation settings
1 Press the Fan button to cycle to the next
available Fan mode.
2 Cycle through the modes until the required
Fan mode is displayed and leave it to
activate.
NOTE: Available Fan modes vary with system
settings.
Fan modes:
‒ Auto: Fan runs only when the heating or
cooling system is on.
‒ On: Fan is always on.
‒ Circ: Fan runs randomly about 33% of
the time.
System operation settings
1 Press the Mode button to cycle to the next
available System mode.
2 Cycle through the modes until the required
System mode is displayed and leave it to
activate.
NOTE: Available System modes vary by model
and system settings.
System modes:
‒ Auto
‒ Heat
‒ Cool
‒ Em Heat
‒ Off
Alerts or Reminders*
1 Press Menu, and then press until display
shows ALRT.
2 Press Select to display which alert(s) are
present.
3 The word SNZE (SNOOZE) appears.
4 Press Select again to snooze the reminder
for 7 days.
5 To clear the alert, press Select, and then
press
to go to CLER (Clear).
6 Press Select to clear the reminder.
* Some alerts cannot be snoozed or cleared.
Please call your local heating and cooling
professional if this occurs. The heating and
cooling system may require service.

Honeywell Home T6 Pro Specifications

General

Model	T6 Pro
Temperature Control	Precise Temperature Control
Backlit	Yes
Operating Modes	Heat, Cool, Auto, Off
Fan Modes	Auto, On, Circulate
Weight	0.5 lbs
Temperature Range	Heat: 40°F to 90°F, Cool: 50°F to 99°F
Warranty	1-Year Limited Warranty
Programmable	Yes
Power Source	Battery or Hardwired
Energy Saving	Yes
Stages	Up to 3 Heat/2 Cool
Smart Features	Remote control via app, Geofencing, Alerts
Dimensions	4.06 in. H x 4.06 in. W x 1.06 in. D
Change Reminders	Filter
Display	Touchscreen
Connectivity	Wi-Fi