Honeywell 30 Series - 9 Viewing System Information; Log; Figure 9-1 System Log

Performance Series IP Camera Software Configuration Guide
90
9 Viewing System Information
This chapter contains the following sections:
• Log, page 90
• Version, page 91
Log
Go to Setup Information Logs.
System Log
System log displays the system events in a chronological order. The system log is stored in the
camera’s buffer area and will be deleted after the camera is rebooted.
Figure 9-1 System Log
Access Log
Access log displays the access time and IP address of all viewers (including operators and
administrators) in a chronological order. The access log is stored in the camera’s buffer area
and will be will be deleted after the camera is rebooted.