Honeywell 30 Series - Figure 5-15 Certificate Request Created; Figure 5-16 Upload Files

Configuring Network Settings
53
Enter the information of Country, State or province, Locality, Organization and Organization
unit. Click Create. The following figure is displayed:
Figure 5-15 Certificate Request Created
Click Export to export the certificate request to your local computer. After you get the signing
certificate from the certificate issuing authority, click Browse and Upload to import it to the
camera. The imported certificate will replace the original self-signed certificate of the camera.
After the certificate file is uploaded successfully, if you want to remove the certificate, click
Remove.
Upload files
Go to Setup Network Setup  HTTPS Upload files.
You can import the certificate from third party here.
Figure 5-16 Upload files
To import the certificate from third party:
1. In the Certificate field, click Browse to select a certificate file you have already applied
from 3rd party or CA domain.
2. In the Key field, click Browse to select a certificate key you have already applied from 3rd
party or CA domain.
3. Click Upload and reboot camera.
After the certificate file is uploaded successfully, if you want to remove the certificate, click
Remove.
Note
• Supported certificate type: HTTPS protocol.
• Supported certificate file format: *.cert format.
• Supported Key format: PEM format.