Honeywell 30 Series - Figure 6-14 Server Type - HTTP

Configuring Video Analytics
67
Figure 6-14 Server type – HTTP
• Server name: Enter a name for the server setting.
• URL: Enter the URL of the HTTP server.
• User name: Enter the user name if necessary.
• Password: Enter the password if necessary.
To verify if the HTTP settings are correctly configured, click Test. The result will be shown in a
pop-up window. If successful, you will receive a test.txt file on the HTTP server.
Click Save server to enable the settings.
Server type - Network storage
Select to send the media files to a networked storage when a trigger is activated. For more
information about how to set up network storage, see Add Server on page 65. Only one NAS
server can be configured.
Click Save server to enable the settings.