Configuring Camera Settings
41
Figure 4-18 PTZ Settings (Fisheye Model)
You can create preset positions in the hemisphere covered by the fisheye lens. A total of 20
preset positions can be configured.
Follow the steps below to configure preset positions and arrange them in a rotational tour
through different positions.
1. Select a video stream on which the PTZ settings will take place.
2. Adjust the shooting area to the desired position using the PTZ keypad, the FOV indicators,
or mouse clicks on the live screen. To begin the mouse control, click the two interactive
windows. Due to the highly-sensitive mouse control, the PTZ control buttons can help
fine-tune to an optimal location.
To Next Page
Loading...
