5800SS1
Wireless Shock
Glassbreak Sensor
“Exclusive wireless
protection that installs in
seconds and eliminates
false alarms.”
Features
• Perfect for kitchens, bathrooms,
skylights and occupied areas
• Mounts directly on glass surface with
3M adhesive tape
• 10’ detection range
• Pull battery tab and enroll… no need to
remove cover during installation.
• No adjustments
Specifications:
• Range: 10’ maximum
• Glass types: plate, tempered,
laminated, wired, coated, double-pane
• Batteries: One Duracell DLCR2 or
equivalent
• Battery life: Up to 10 years
• Operating temp: 32°F to 122°F
• Dimensions: 1.6”H x 1.6”W x 0.8”Dk
Glassbreak Detectors
16
ASC-SS1
Shock Glassbreak Detector
“Glass-mounted detection
providing the ultimate in
false alarm immunity.”
Features
• Mounts directly on glass surface
• Outstanding false alarm immunity
• Epoxy sealed against moisture and
corrosion
• No adjustments
Specifications:
• Range: 8’ maximum
• Glass types: plate, tempered,
laminated, wired, coated, double-pane
• Loop voltage: 3VDC to 20VDC
• Loop current: 100mA maximum
• Power requirements: <1mA
• Alarm output type: Normally-closed
solid-state output, non-polarized
• Alarm output timing: Open for 1 second
minimum during an alarm condition
• Alarm output resistance: 20M maximum
(non-alarm)
1M minimum (alarm)
• Operating temp: 0°F to 130°F
To Next Page
Loading...
