8
IMPORTANT: Your Bluetooth must be enabled and you must be within range of the lock.
3. Select which type of lock you would like to add
4. Click on available lock
5. Follow prompts to name the device
going to the “Lock Setting” page.
Go to “Lock Settings” by selecting the “Settings icon “*” in the top right corner of the screen.
SET ADMIN PASSCODE
IMPORTANT: Your Bluetooth must be enabled and you must be within range of the lock.
1. Select “Admin Passcode” from the list.
2. You will be prompted to enter your Account Password.
3.
CHANGE LOCK NAME
1. Select “Name” from the list
2.
ACTIVATE AUTO LOCK
1. Select “Auto Lock” from the list
2.
3.
4.
NOTE: Auto lock can also be programmed using the digital keypad
ADD LOCK TO GROUP
If no groups exist you will have to create one. Press “Create Group” and enter the group name.
1. Select “Group” from the list.
2.
3. Select the Group to place the lock in.
4.
UPGRADE THE CONNECTED LOCK
In order to upgrade you have to be the AP for the lock, and within Bluetooth range
that the lock is upgrading.
1. Press “Lock Upgrade” from the list to Check for Updates
2. Press “Upgrade’ (in case a pop up notification appears, follow it to finish the upgrade).
CONNECT TO BLUETOOTH LOCK
MANAGE LOCK SETTINGS
To Next Page
Loading...
Need help?
General
