Honeywell 9782 Series - Figure 3-3-2 Mounting and Dimensions - Backlit Display Option

Unpacking, Preparation, and Mounting
7/99 9782 Series Conductivity/Resistivity Analyzer/Controller - Operator’s Manual
3-7
Figure 3-3-2 Mounting and Dimensions – Backlit Display Option
6.43 ±0.70
163.32 ±1.78
C
L
1.21 ±.025
30.73 ±0.64
6.27 ±.040
159.26 ±1.02
.12 min.
3.04
.37 max.
9.40
3.31
84.07
6.63
168.40
C
L
7.68 ±.060
195.07 ±1.52
7.68 ±.060
195.07 ±1.52
3.06
77.80
7.64 ±.070
194.06 ±1.78
Vertical Rear Pipe Mounting
1.50
38.10
3.00
76.20
C
L
7.64 ±.070
194.06 ±1.78
Top View
Four holes in bracket or
1/4 dia. mounting bolts
(bolts by customer)
6.43 ±0.70
163.32 ±1.78
C
L
1.27 ±.025
32.26 ±0.64
6.27 ±.040
159.26 ±1.02
.25 max.
6.35
R.H. Side View
Wall Mounting
Panel Mounting
Customer Panel
Panel Mounting
into existing 7075, 7076, 7077, and 7078 series cutouts
1.00
25.40
IPS Pipe
(by customer)
inches
millimeters
LEGEND:
Note 1: Do not exceed 80 lb-in torque
when tightening fastners.
Customer Panel