BENDIX/KING
KAP 140
Page 2--1
Revision 2, Dec/2002
CS:15574F02.IDU
SECTION II
SYSTEM OPERATION
2.1 GENERAL
2.1.1 OPERATING MODES (OVERVIEW)
The --7xxx FCC flavors provides the following roll modes: Roll Stabilization (default mode), NAV
and Approach Arm and Track (including Reverse Localizer approaches), and Heading Select. The
pitch axis provides: Vertical Speed Select (default), Altitude Arm, Capture and Hold, Glideslope
Arm, Capture and Track, and altitude alerting. Pitch autotrim and Manual Electric Trim are also
provided.
The --5xxx FCC flavors do not provide altitude alerting nor altitude arm and capture functions. The
--2xxx FCC flavors do not provide any pitch modes, but do allow for Manual Electric Trim.
2.2 KC 140 MONITORS
This section will give a brief description of the monitors that are implemented in the KC 140 flight
computer. The following monitors detect potentially unsafe AFCS operation. They will disengage
and/or prevent operation of certain modes.
To Next Page
Loading...
