EasyManua.ls Logo

Honeywell BENDIX/KING KAP 140 - Page 61

Honeywell BENDIX/KING KAP 140
108 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
BENDIX/KING
KAP 140
Page 3--17
Revision 2, Dec/2002
CS:15574F02
ITEM DESCRIPTION
Roll Rate Combined roll rate and yaw rate output signal
supplied from the turn coordinator with a scale factor
of 333 mV per deg/sec. Input range is ± 7.5 deg/s.
Displayed resolution is 0.014 deg/s per bit. Validity
based on Rate Valid input.
Roll Steering Roll steering signal is supplied from the KLN 94 with
a scale factor of 2 volts per deg/sec. Input range is
+ 6 deg/sec. Displayed resultion is 0.012 deg/sec
per bit. Validity based on Roll Steering valid.
Heading Datum Heading datum signal supplied from a horizontal
situation indicator with a scale factor of 550 mV per
degree. Input range is ± 25 degrees. Displayed
resolution is 0.089 degrees per bit. Validity based on
DG Valid input.
Course Datum Course datum signal supplied from a directional gyro
or horizontal situation indicator with a scale factor of
210 mV per degree. Input range is ± 60 degrees.
Displayed resolution is 0.116 degrees per bit.
Validity based on DG Valid input.
NAV dev Navigation deviation signal supplied from the
VOR/ILS or GPS receiver with a scale factor of 15mV
per degree VOR (equivalent to 10% of Full Scale
deflection). Input range is ± 16.7 degrees.
Resolution of display value is 0.033 degrees per bit.
Validity based on NAV Valid input.
GS dev Glideslope deviation signal supplied from the
VOR/ILS receiver with a scale factor of 214mV per
degree. Input range is ± 1.17 degrees. Resolution
of display value is 0.0023 degrees per bit. Validity
based on GS Valid input.
Trim sense Torque output supplied from KS270C Pitch servo
with a scale factor of 100mVper in--lb. Input range is
± 31 in--lb where positive implies CW torque.
Resolution of display value is 0.061 in--lb per bit.
Validity based on internal Analog Valid.
Temperature Temperature sensor internal to the FCC. Input range
is --273 ° C to + 227 ° C. Displayed resolution is 0.49
° C per bit. Validity based on Analog Valid.

Related product manuals