BENDIX/KING KN 63
Rev 4, October/2004 00176I04.TDC Page 1-2
*The maximum range at which the DME will lock up is determined by altitude and ground station
output power and sensitivity.
**The KDI 572 and KDI 573 do not require power from the aircraft power buss.
TABLE 1-1 TECHNICAL CHARACTERISTICS
SPECIFICATION CHARACTERISTIC
Output Power 50 watts peak pulsed power minimum, 100 watts nom-
inal
Maximum Display Range* 389 nautical miles
Aquisition Sensitivity -82dBm minimum, -87dBm nominal
Range Accuracy* ±.1 nautical miles or ±.14%, whichever is greater from
0 to 99.9 nautical miles. ±1 nautical mile from 100 to
389 nautical miles.
Ground Speed Accuracy ±1 knot or ±1%, whichever is greater from 0 to 999
knots.
Time-to-Station Accuracy ±1 minute from 0 to 99 minutes
Search Time 1.0 second nominal
Memory Time 11 to 15 seconds
Audio Output (Ident) Level adjustable up to 15mw into 500 ohm load, nomi-
nally set for 2mw.
Maximum altitude 50,000 feet
KN 63 Dimensions and Weight
(Including mounting rack and
connectors)
Length: 11.550 inches (29.34 cm)
Width: 1.18 inches (3.00 cm)
Height: 6.50 inches (16.51 cm)
Weight: 2.8 lbs (1.27kg)
KDI 572, KDI 573 and KDI 574
Dimensions and Weight
(Including connector)
Length behind panel: 8.35 inches (21.21cm)
Width: 3.50 inches (8.89 cm)
Height: 1.35 inches (3.43 cm)
Weight: .8 lbs (.363 kg) KDI 572
Weight: .7 lbs (.318 kg) KDI 573
Power Requirements (KN 63)** 11-33VDC at 17 watts maximum with two
indicators
Channeling Sources a. External control head providing shifted BCD code
such as KFS 560B.
b. External control head providing ARINC 2X5 code
such as KX 170 and KFS 560B.
c. External control head providing slip code such as
KX 170A, KX 170B, KX 175A, and KX 175B.
KDI 572 Lighting 066-1069-00 - .065 amps at 28V or .13 amps at 14V
066-1069-01 - .23 amps at 5V
To Next Page
Loading...
