Honeywell CENTRA LINE LION CLLIONLC01 - Mounting;Dismounting Auxiliary Terminal Packages

Mounting/Dismounting Modules LION System
EN1Z-0921GE51 R0709
22
Operating the Individual Switches
► Use a screwdriver to open/close the appropriate
disconnector switches of the manual disconnect
modules.
Fig. 25 Operating the disconnector switches
Dismounting Manual Disconnect Modules
► Open the red lock mechanism by sliding it to the left and
then gently pull the electronic module out of the terminal
socket.
Mounting/Dismounting Auxiliary Terminal
Packages
The XS814 Auxiliary Terminal Package can be mounted on
any pluggable I/O module.
The XS830 and XS831 Auxiliary Terminal Packages are
suitable for mixed I/O modules, only. Specifically, they can
be mounted on the top and/or bottom of the CLIOP830A.
For reasons of mechanical stability, a maximum of two rows
of Auxiliary Terminal Packages may be mounted together
on any given I/O module.
Mounting Auxiliary Terminal Packages
► Push the auxiliary terminal package onto the grooves of
the corresponding terminal socket / the mixed I/O
module.
Fig. 26 Mounting the auxiliary terminal package onto the
terminal socket / mixed I/O module
Dismounting Auxiliary Terminal Packages
► Push down the catch of the auxiliary terminal package
and pull it out of the grooves of the terminal socket / the
mixed I/O module.
Fig. 27 Dismounting the auxiliary terminal package from
the terminal socket / the mixed I/O module