Honeywell CENTRA LINE LION CLLIONLC01 - Page 7

LION System System Overview
7 EN1Z-0921GE51 R0709
Auxiliary Parts
Module Type Figure
Corresponding
I/O modules
CLIOP/CLIOL…
Information
XS812
…821
…822
…823
Module allows disconnection of
individual I/O signals
Manual disconnect
modules
XS812RO
…824
…825
Module allows disconnection of
individual I/O signals
For 24 V applications only
XS814
All pluggable LION I/O
modules
Two groups of 7 terminals
connected to each other for
redistributing voltage (see also
Fig. 94)
XS830
A1 A2
A3
A4
A5 A6
A7
A8 A9
B1 B2
B3
B4
B5 B6
B7
B8 B9
Two groups of nine internally-
connected push-in terminals, for
distributing signals/power (see
also Fig. 96).
Auxiliary terminal
package
XS831
A1 B1 A2 B2
A3 B3
A4 B4 G1 G2
A5 B5 A6 B6
A7 B7
A8 B8
CLIOP830A, only
Two groups of four pairs of
push-in terminals, for converting
0…20 mA signals into
0…10 Vdc signals, and one
push-in ground terminal per
group. (see also Fig. 98)
Cross connectors,
short (yellow)
XS817
…824
…825
Connects 3 relay commons,
required in case of line voltage
and low voltage in the same I/O
module
Table 5 Auxiliary parts
Spare Parts