Technical Specifications and Dimensions
Introduction Manual Part No.: 4417591_Rev10
2 - 2 CIU 888
Available (Calculated)
Inventory Data
- S&W, Vapor (4 types), DCF, TCF,
manual CTL
- Volume (TOV, GOV, GSV, NSV)
- Reference Density
- Mass (liquid, vapor, total)
- Volume Correction Factor (VCF, CTL)
- Volume Derived Flow
Clock & Time
Synchronization
External using (optional) Entis Pro.
Supported Engineering Units
- Level m, mm, ft, in, in/16 and ft-in-16 (fis)
- Temperature °C, °F
- Density kg/m
3
, °API, lb/ft
3
, RD60/60, lb/Usgal
- Pressure kgf/cm
2
, kPa, psi(g), Pa
- Volume m
3
, USgal, bbl, l(L)
- Mass/weight kg, lb, metric ton, long ton, US ton
- Flow m
3
/min, m
3
/h, l/min, I/h, bbl/min, bbl/h,
USgal/min, USgal/h, UKgal/h
Available Correction Methods
- CTSh
- Floating Roof Weight
Native profiles support
- Temperature profiles data - Periodic scanning of temperature profiles data from
BPM and TRL/2 gauges and presentation in Modbus output (RTU and TCP/IP)
based on configuration.
- Density profiles data - Density profiles data collection from Honeywell Servo gauges
and presentation in Modbus output (RTU and TCP/IP) based on user command.
Host Connectivity
Serial Ports 2x Modbus serial + 4 additional ports by using option slots
Ethernet Ports 3x Modbus TCP/IP ethernet (FTEA, FTEB and Office LAN)
Supported Host Protocols - Serial Modbus slave (CIU 880 Modbus maps)
- Ethernet Modbus TCP/IP Server (CIU 880 Modbus maps)
- CIU 858 Emulation
- Modbus Emulation
Number of Modbus TCP/IP
Clients
15
Field Connectivity
Field Ports 6x option slots (of which 4 Serial ports can be used for host connectivity).
Wireless Connectivity ISA 100 via Honeywell WDM
Available Option Boards - Enraf BPM Field Bus Card
- Enraf Serial Communication Card
- Enraf TRL/2 Field Bus Card
- Serial Modbus Card
Compliance & Certifications
European Directives - CE
- 2006/95/EC (Low Voltage directive)
- 2004/108/EC (EMC)
Functional Specification