Storage, Unpacking and Handling - Unpacking and Inspection
Part No.: 4417590_Rev13 CIU 888
Installation Manual 1 - 1
CHAPTER 1 STORAGE, UNPACKING AND HANDLING
1.1 Unpacking and Inspection
Check
the
identification
code
on
the
label
to
verify
that
the
CIU 888
was
delivered
in accordance
with
your
order.
The
CIU 888
is
packed
in
a
shipping
carton
for
protection
against
damage.
If you find
any
shipping
or
handling
damage
at
delivery
or
during
unpacking,
immediately notify
the
carrier.
If
any
equipment
is
missing
or
incorrect,
notify
the
Honeywell Enraf
distributor.
As soon as you receive the box, open it and check the contents right
away.
Check the contents against the factory checklist and not only from the
type plate.
1.2 Storage
Store the
CIU 888
in
its
original
packing
indoors in a safe, dry place.
Storage
temperature
may
vary
between
-20 °C and
+85
°C
(-4
°F and
+181
°F).
1.3 Handling
Handle the CIU 888 with care. When handling or carrying it, be aware of
the front panel that can open and be damaged.
The CIU 888 unit weighs about 7.5 kg. The recommended way to carry
the unit is by holding it from the front and rear side.
To Next Page
Loading...
