Honeywell CIU 888 - Chapter 1 Introduction; When to use CIU 888 Service Tool

Mechanical Installation - Mounting
CIU 888 Part No.: 4417590_Rev13
2 - 4 Installation Manual
$*6
2.5.2 Rack Mounting
For rack mounting a set of 2 rack mounting brackets or ears is required.
If you have not ordered it from the factory, you can order it anytime as
an accessory. See the accessory list provided in this manual.
FIGURE 2-2 Rack Mounting
The steps below show the rack mount bracket assembly with the unit.
1. Fix the left bracket (provided as part of rack mount accessories) on
the bottom of the CIU 888 by fastening the screws. Repeat the same
process for fixing the right bracket on the other side.
6.8 [¼ in]
400 [15 ¾ in]
465 [18 ¼ in]
483 [19 in]
76
[3 in]
2U