License Updates
Firmware Upgrade Manual Part No.: 4417596_Rev11
2 - 6 CIU 888
7. If required, click View License to view the details of the license that
is currently installed.
The View License window is displayed (see FIGURE 2-7).
FIGURE 2-7 CIU 888 Web interface - View License window
The View License window provides the following information (see
TABLE 2-1):
TABLE 2-1 Description of license details
Field Description
Customer Name Displays the name of the customer/company to whom the
license was issued.
License creation date Displays the date (year-month-day) and time (hours:minutes:
seconds) when the license was created.
Site name Displays the name of the site as configured during commis-
sioning of the CIU 888. See the CIU 888 Configuration Man-
ual (Part No. 4417593) for more information.
Software MSG Displays the software license code as defined according to
the Model Selection Guide for the CIU 888 (see
APPENDIX A).
Hardware MSG Displays the hardware license code as defined according to
the Model Selection Guide for the CIU 888 (see
APPENDIX A).
Calculations enabled Displays whether the Volume Calculation module is enabled
(true) or not (false).
Redundancy enabled Displays whether redundancy is enabled (true) or not (false).
Number of tanks Displays the maximum number of tanks supported by the
CIU 888.
W&M enabled Displays whether the CIU 888 is Weights and Measures
approved (true) or not (false).
To Next Page
Loading...
