Honeywell CIU 888 - CIU 888 and Service Tool Compatibility Matrix; Recommended workflows to commission CIU 888

Table of Contents
Sealing Guide Part No.: 4417595_Rev10
4 CIU 888
$*6
5. Click CONFIGURE in the section menu bar.
The Configure window is displayed (see FIGURE 1-6).
FIGURE 1-6 CIU 888 Web interface: Configuration window
The Configuration windows displays the global settings and internal
SI units that have been configured for the CIU 888, and indicates for
each global setting whether it is W&M relevant or not. Furthermore,
the Configuration window provides for each site element (tank, port,
gauge) in the site tree an overview of the configuration settings. For
each configuration setting the configured value is displayed, and
whether the configuration setting is W&M relevant or not.
6. Verify if all W&M relevant configuration settings have been
configured correctly. Configuration settings that have not been
configured correctly need to be re-configured.
NOTE: Refer to the Configuration Manual CIU 888 (Part No. 4417593) for more
information about changing the configuration settings of the CIU 888.
1. CONFIGURE option
2. Site tree
3. Configuration settings
1
2
3