Honeywell CIU 888 - Chapter 2 Installing CIU 888 Service Tool; Prerequisites

Table of Contents
Part No.: 4417595_Rev10 Sealing Guide
CIU 888 9
$*6
1. Close the cover of the W&M lock key switch and seal the cover using
a sealing wire (see FIGURE 1-9).
FIGURE 1-9 CIU 888: Cover of W&M lock key switch
2. Seal the cover of the CIU 888 in one of the following ways:
 Attach a permanent self-adhesive seal/sticker to the cover of the
CIU 888 as shown in FIGURE 1-10. The seal/sticker should be