Virtual Tunnel
Part No.: 4417589_Rev13 Protocol Manual - CIU Emulation
CIU 888 2 - 7
a) Right-click the site name in the site tree, and then click Add
Device > TCP/IP in the pop-up menu.
The Ethernet Port window is displayed.
FIGURE 2-9 Engauge: Ethernet Port window
b) Enter the properties of the device. In the Gateway IP Address text
entry box, enter the IP address of the CIU 888, i.e. 192.168.1.1.In
the Time Out text entry box, enter 4000. The other settings can be
left as they are. Next, click OK to save the settings and to close
the Ethernet Port window.
NOTE: When Honeywell TRL/2 gauges are connected to CIU 888, configure Time
Out as 8000 and Retries as 3
To Next Page
Loading...
