75 Series Mobile Computer User Guide 95
6. For 802.1X Authentication, select Disabled.
7. For Network Key Value, enter an ASCII key or a hex key.
• For 64-bit WEP, enter a 5-byte value: 5 ASCII characters or 0x followed by 5
hexadecimal pairs.
• For 128-bit WEP, enter a 13-byte value: 13 ASCII characters or 0x followed
by 13 hexadecimal pairs.
8. For Network Key Index, select the key you want to use to transmit data.
9. Tap OK.
Use Open (No Security) Associations with Microsoft Security
To create an open network, you can set no security with Microsoft security.
1. Start Enterprise Settings
2. Select Communications > 802.11 Radio > Microsoft Security.
3. Enter the Network name (SSID).
4. For Network Authentication, select Open.
5. For Data Encryption, select Disabled.
6. Tap OK.
To Next Page
Loading...
