Honeywell CK75 - Install a Microsd Card in a CK75

30 75 Series Mobile Computer User Guide
Install a MicroSD Card in a CK75
You need a slotted screwdriver to install the microSD card. Format the microSD
card before initial use.
1. Press the Power button, and then select Hibernate.
2. Remove both ends of the handstrap.
3. Remove the battery (see page 10).
4. Remove the two screws that attach the card access door to the back of the
computer.
5. Slide the SIM card holder to the left and up to reveal the microSD card holder.