75 Series Mobile Computer User Guide 131
Scanner Settings
Imager Settings - Optimized Imager Modes Settings (Advanced)
Imager Settings - File Properties and Viewfinder Properties
Imager Settings - Signature Image Capture, Scenario Properties
Scanner Setting Default
Trigger Predefined Modes Level
Trigger Mode Level
Aimer Mode Typical aimer
Hardware Trigger Enable
Trigger Timeout (sec) 2
Aiming Duration (msec) 500
Turn Off After Good Read Enable/One-shot
Auto-Trigger delay (msec) 0
Optimized Imager Mode Default
Predefined Modes 1D and 2D Standard
Imager decode mode 2D Imager
Lighting goal 128
Top position 0
Bottom position 479
Aimer flashing Flashing (optimize for decode)
Illumination level 40
Maximum lighting and exposure Enable
Initial 1D search area Center
Damaged 1D codes Disable
File or ViewFinder Property Default
Image File Location \My Documents\MDI
Folder memory limit (MBytes) 13
Enable tagging location data Disable
Viewfinder Properties Disable
Signature Image Capture,
Scenario Property
Default
Enable scenario 1, 2, 3, or 4 Disable
Bar code identifier None
Document Imaging Disable (no focus check)
To Next Page
Loading...
