Honeywell CK75 - Page 78

66 75 Series Mobile Computer User Guide
Viewfinder and Focus Settings and Descriptions
Lighting Settings and Descriptions
Lighting goal Default is 30.
Illumination level Default is 3.
Initial 1D search area • Center
•Full
• Smart raster
Damaged 1D codes • Disable
•Enable
Enable viewfinder • Enable
•Disable
Focus mode Sets the focus mode
for the camera when
reading bar codes,
document imaging, or
capturing signatures.
•Manual
• Continuous autofocus
• Single shot autofocus
• Macro
• Extended (10 cm to infinity)
Manual focus value When Focus Mode is
set to Manual, this
value sets the manual
focus level.
Default is 65. Set to 0 for infinity, or 255 for
closeups.
Setting Description Choices
Setting Description Choices
Enable viewfinder • Enable
•Disable
Focus mode Sets the focus mode
for the camera when
reading bar codes,
document imaging, or
capturing signatures.
•Manual
• Continuous autofocus
• Single shot autofocus
• Macro
• Extended (10 cm to infinity)
Manual focus value When Focus Mode is
set to Manual, this
value sets the manual
focus level.
Default is 65. Set to 0 for infinity, or 255 for
closeups.
Setting Description Choices
Torch Sets whether or not to
use the lighting LED.
•Off
•On
•Auto