Honeywell CK75 - Manage the Computer; How to Manage the Computer in Your Network

75 Series Mobile Computer User Guide 85
1. Tap Start > Settings > System > Wireless Scanning.
2. Tap Add Device.
3. Select Quick Connect, Search, or Manual. Follow the instructions on the screen
to add a Bluetooth scanner.
After you add a Bluetooth scanner, you can configure scanner settings and
parameters in Enterprise Settings.
Connect to a Bluetooth Scanner with EasySet
You can connect a Bluetooth scanner to the computer, by scanning a configuration
bar code created with the Honeywell EasySet software utility. Make sure that the
Bluetooth radio in the computer is turned on before you try to connect to a scanner.
Note: To create the configuration bar code, you need the computer Bluetooth address.
To be able to see the Bluetooth MAC address, the Bluetooth radio has to be enabled.
Once the radio is enabled, open Enterprise Settings > Communications > Bluetooth.
Scroll down to “Device Address” to find the Bluetooth MAC address.
1. Go to www.honeywellaidc.com.
2. Select Get Resources > Software.
3. Click on the Technical Support Downloads Portal link,
https://hsmftp.honeywell.com.
4. Create an account if you have not already created one. You must log in to
download the software.
5. Install the Honeywell Download Manager tool on your PC prior to trying to
download any files.
6. Locate EasySet in the Software directory (Barcode Scanners > Software > Tools
and Utilities).
7. Select Download. Follow the prompts to download the application.
8. Open EasySet and select Interface > Bluetooth > Connect/disconnect >
Compose BT address.