Terminology Description
generated by the controller.
UIO Universal Input/Output Module
Related documents
The following list identifies publications that may contain information
relevant to the information in this document.
n ControlEdge Builder Software Installation User’s Guide
n ControlEdge Builder Software Change Notice
n ControlEdge Builder User’s Guide
n ControlEdge 900 Platform Hardware Planning and Installation
Guide
n ControlEdge Builder Function and Function Block Configuration
Reference
n ControlEdge Builder Protocol Configuration Reference Guide
n ControlEdge PLC and ControlEdge RTU Network and Security
Planning Guide
n ControlEdge EtherNet/IP User's Guide
n ControlEdge_PLC_Interface_Reference
n DNP3 Interface Reference
n FDM User's Guide
10
Chapter 1 - About this guide
To Next Page
Loading...
Need help?
General
