Contents [ hide
1 Introduction
2 Out of the Box
3 Memory Card Specifications
4 Mobile Computer Features
5 Install a microSD Card (SD)
6 Install the Battery
7 Charge the Mobile Computer
8 Sleep Mode
9 About the Home Screen
10 Navigation and Function Buttons
11 About Provisioning Mode
12 Scan a Bar Code with the Scan
Demo
13 Sync Data
14 Restart the Mobile Computer
15 Support
16 Related Manuals
Introduction
This document is only for Dolphin CT60 NI mobile computers marked as certified for use in non-incendive (NI)
environments. CT60 NI models can be identified by NI markings on the device label verifying non-incendive
certification.
Warning: Explosion Hazard – Substitution of components may impair suitability for Class I, II, III
Division 2 locations. Avertissement: Risque d’ explosion – Le remplacement de composants risque de
compromettre l’adaptation du produit aux sites de catégorie I, II, III division 2.
Out of the Box
Make sure that your shipping box contains these items:
Dolphin CT60 NI mobile computer
Rechargeable 3.86 VDC Li-ion battery
Product documentation
Note: CT60L0N models do not include a WWAN radio.
Memory Card Specifications
Honeywell recommends the use of Single Level Cell (SLC) industrial-grade microSDTM or microSDHCTM memory
cards with Dolphin mobile computers for maximum performance and durability. Contact a Honeywell sales
representative for additional information on qualified memory card options.
Mobile Computer Features