11
Installing a SIM Card
1. Press the Power key to put
the terminal in Suspend Mode.
2. Release the hand strap near the
base of the terminal.
3. Remove the battery door and the
battery.
4. Remove the protective cover
over the SIM socket.
5. Unlock the access door to the
SIM socket by sliding the door
away from the serial number
label located in the battery well.
6. Lift the door up to expose the
socket.
7. Insert the SIM card into the
socket.
Note: Make sure the interface on the
card is connected to the SIM
Card interface in the socket;
align the beveled corner of the
card with the beveled corner of
the socket.
8. Close and lock the access door
by sliding the door toward the
serial number label.
9. Replace the protective cover
over the SIM socket.
10. Install the battery and the battery
door.
Step 4
Step 5
Step 6
Step 9
Step 8
Step 7
97_QS.book Page 11 Thursday, September 9, 2010 9:57 AM
To Next Page
Loading...
