14
Using the Color Camera
1. Tap Start > Demos > Camera Demo
2. Adjust the camera settings using the menu at the top
of the display screen.
3. Point the terminal's camera
lens at the object you want
to capture. The camera lens
is located on the back panel
of the terminal.
4. Center the object in the
touch screen display.
5. Press the ENT key .
The terminal’s red LED
illuminates during picture
capture.
Note: Tap the green arrow to
review or edit your pictures.
Tap the green box to exit
the picture review/edit screen.
Color
Zoom
Flash
Pixels
Brightness
97_QS.book Page 14 Thursday, September 9, 2010 9:57 AM
To Next Page
Loading...
