7 - 13
To prevent data loss, back up all user data to an SD card or external memory device before
performing an upgrade.
Note: An active Microsoft ActiveSync or Windows Mobile Device Center connection between a host workstation and
the Dolphin terminal may be required for some types of software upgrades. For additional information, see
Connecting and Synchronizing the Terminal and Workstation on page 7-8.
For information on File Provisioning on the 99EX and 99GX, see page 1-10.
99EX and 99GX COM Port Assignment Table
COM Port Description
COM0 Unused
COM1 Serial Port: RS232 Connector on the bottom panel
COM2 Bluetooth
COM3 IrDA: Serial Infrared (SIR) up to 115 Kbps
COM4 Available
COM5 Bluetooth DUN
COM6 IrCOMM
COM7 GPS: COM Port for the GPS receiver (99EX Models)
COM8 USB Serial: Virtual USB Serial port for ActiveSync
COM9 Bluetooth BTHATCI server
To Next Page
Loading...
Need help?
General