7 - 2
Using the IrDA Port
Using the IrDA port, you can send and receive data between the terminal and other devices equipped
with infrared. This can include, but is not limited to, Windows Embedded Handheld information such as
Contacts and Tasks, as well as software upgrades.
IrDA Port Location
Note: Your Dolphin model may differ from the models illustrated; however, the features noted are standard for all
99EX and 99GX models unless otherwise indicated.
To send or receive, the IrDA ports of both devices - whether it is two terminals, or a terminal and a host
device - must be aligned with each other and within a close range. The maximum data transfer speed is
115 Kbps.
Sending Data
1. Align the IrDA ports.
2. Open the program where you created the item you want to send and locate the item in the list.
You can also beam files, but not folders, from File Explorer.
3. Tap and hold the item and select Beam File.
To Next Page
Loading...
Need help?
General