Honeywell Dolphin 99EXLF User Manual

2 - 8
Back Panel Features for the 99EX and 99GX
Battery Door
The battery door secures the Li-ion or Li-poly battery pack in the terminal’s battery well. For
information on how to remove the battery, see Replacing the Main Battery Pack on page 1-4.
Color Camera (99EX Only)
The 3.1-Megapixels Resolution color camera provides easy picture capture with Automated
Camera Control (ACC). Additional features include automated picture profiles and an
Application Programming Interface (API).
Fastener for the Stylus Tether
The Stylus Tether helps prevent accidental loss when the stylus is not stored in the stylus slot.
A stylus tether is a coiled, elastic cord that tethers the stylus to the terminal. Secure one end
of the cord to the back panel of the terminal and the other end to the stylus.
Flashlight/Camera Flash (99EX Only)
The flashlight/camera flash is located on the back panel of the terminal. When used as a
Flashlight, press the Blue key + key to turn the flashlight on or off. When used as a
Camera Flash with the terminal’s color camera, the flash is controlled by the camera
application.
Hand Strap (99EX Only)
The 99EX comes with a removable, elastic hand strap.
Image/Scan Engine Window
The available image engines read and decode linear, stacked linear (e.g., PDF417), and 2D
matrix bar code symbologies. The available image engines contain a laser aimer for greater
accuracy. The laser apertures for the imaging engines’ laser aimers are contained behind this
window. For more details, see Using the Scan Image Engine on page 3-1.
Memory Card Socket and SIM Card Socket
The memory card socket provides the user with the option to expand the terminal memory
capacity using microSD™ or microSDHC™ memory interfaces.
Note: Honeywell recommends the use of Single Level Cell (SLC) industrial grade microSD or
microSDHC memory cards with Dolphin terminals for maximum performance and durability.
Contact a Honeywell sales representative for additional information on qualified memory card
options.
The Subscriber Identity Module (SIM) card socket provides the option to install an active
service provider SIM card for cellular network connections on WWAN equipped models. A
standard size SIM card fits the socket.
Both sockets are located under a protective door in the battery well of the terminal. A T6 Torx
screw secures the socket door closed. The environmental rating of the terminal is preserved
when the socket door, battery pack, and the battery door are properly installed sealing the
cards against moisture and particle intrusion.
For information on card installation, see Installing a Memory Card on page 2-17 or Installing a
SIM Card on page 8-2.

Honeywell Dolphin 99EXLF Specifications

General

Brand	Honeywell
Model	Dolphin 99EXLF
Category	PDA
Language	English