8
The wireless keypad with display offers a complete range of tools to manage your alarm system,
from normal operation to dedicated user functions. This keypad is optional, but 1 to 4 keypads of
this type may be included with this system.
The keypad is used to arm and disarm your security system using a valid access code or key TAG.
The master code or TAG is required to modify other users’ codes and TAGs, and to authorise the
alarm company to access the system for maintenance.
Other user functions include remote control of electrical equipment*, manual bypass of detectors,
setup of beeps and equipment testing.
This keypad also provides full system status information, with display icons, messages, and beeps
emitted by the keypad. You can also view the history of alarms that have occurred.
NB: This keypad is suitable for indoor use only.
*
This function requires an optional X10 extension with X10 receivers.
3
INTRODUCTION TO THE TCU KEYPAD
TAG identification
area
Total set
arming key
Partial set
arming key
Disarming / Go to
previous menu /
Cancel choice key
Shortcuts and
menu browsing key
Validation &
Status key
Screen
Codes/text
entry keypad
Total set
arming light
Partial set
arming light
Shortcuts and menu
browsing key
Keytag (TAG)
for identification
How to use the wireless keypad with display
To Next Page
Loading...
Need help?
General
