If the data is for a New device, a list of device types
will appear, select one and go to Next.
Enter a device name and description and click on OK.
Next choose the format type for the importing data. Th
e two different formats are:
X Series (recommended) - This has the benefit of flexible pen
scale limits that can be changed at any
time in the X Series release of TrendServer. Data imported in this format cannot be loaded into a version
5 release of TrendServer.
Version 5 - Pen scale limits will be fixed once set, and any data values imported outside of the pen scale
limits will be cappe
d at the appropriate limit. However, this data can be read in by version 5 release of
TrendServer. Click on OK and the data will start to import.
If there is a device in the database with the same Se
rial number but a different ID, this will be flagged up
and you can choose to add the data to this device or a new device will be created. For a new device
choose from the Database Device Destination User Selection box.
PCMCIA Opti
on Manual 21
To Next Page
Loading...
