The Data File conversion will start and the destination
box will appear to confirm the correct device.
When the file conversion is complete press ok.
When the import is complete the data will be automatically displayed as a grap
h showing the data as pen
traces and displaying each associated pen. Any events will be imported (via Trendbus only) with the data
and can be displayed on the graph using the Event button at the bottom of the graph.
The device is loaded into the recorders list for identification purpo
ses, click on the Recorders icon to
display the list of recorders. The device can not be configured from the software. The imported data can
be graphed, analyzed, archived, printed and exported to a spread sheet.
For data imported from Honeywell V5, X Series recorders, an Event viewer is available by right clicking
on the re
corder in the recorders list and selecting Events.
Refer to the TrendManager Pro Software Suite manual
43-TV-25-11 for further information.
Available at www.honeywell.com/ps
22 PCMCIA Option Manual
To Next Page
Loading...
