Honeywell Eclipse MS5145 Quick Start Guide

Host Configurations
Scan one of the following codes, then scan the Recall Defaults
code, to program the scanner for one of the following configurations.
Miscellaneous
Minimum Symbol Length specifies the minimum number of
characters allowable for non-UPC/EAN bar codes. Scan the Enter/
Exit Programming bar code to begin. Scan Minimum Symbol
Length, then scan the minumum number of characters allowed using
code byte bar codes, below. To save, scan the Enter/Exit
Programming bar code again.
³84661280
³84660030
³84660140
Verifone® Ruby Terminal
Defaults
Gilbarco® Terminal
Defaults
Wincor Nixdorf Terminal
Defaults
³999998
Recall Defaults
³901800
Minimum Symbol Length
³999999
Enter/Exit Programming

Honeywell Eclipse MS5145 Specifications

General

Scan Pattern	Single Line
Light Source	650 nm visible laser diode
Scan Speed	72 scan lines per second
Interface	USB, RS232, Keyboard Wedge, IBM 46xx (RS485)
Weight	100 g (3.5 oz)
Operating Temperature	0°C to 40°C (32°F to 104°F)
Storage Temperature	-40°C to 60°C (-40°F to 140°F)
Humidity	5% to 95% relative humidity, non-condensing
Drop Resistance	Designed to withstand 1.5 m (5 ft) drops
Scan Rate	72 scan lines per second
Decode Capability	1D barcodes
Electrical Specifications	Input Voltage: 5 VDC ± 0.25 V
Regulatory Compliance	CE, FCC, RoHS