64
www.honeywell.com
Item Item Name & Description
776 Timeout Delay 2
Time in seconds that ERX waits for the host computer to send an ENQ, following an
EOT before issuing an error 21.
Default: 25
777 RBX Alarm Event
Indication of a RBX alarm activity since the recorder was last interrogated.
779 Sample Enable
780 Modem Initialization String
Character string used to initialize recorder’s modem at t
he beginning of a call-in.
Default: ATE0Q0V0X4
781 Modem Dial String
Character sting used to initial dialing.
Default: ATDT
782 Modem Hang-up String
Character string used to disconnect modem communications.
Default: ATH
783 Call Out Stop Time
User defined time during the calendar day the modem power control will end.
Default: 23 59 00
784 Call-in Phone Number 1, IP Address 1
Ph
one number or IP Address 1 the recorder will call when the scheduled call-in feature is
enabled.
785 Call-In Phone Number 2, Address 2
Phone number or IP Address 2 the recorder will call when the scheduled call-in feature is
enabled.
786 Modem Retry Interval A
The amount of time in minutes to wait before attempting a retry, following a failed
scheduled or alarm call-in. Often referred to
as the “Primary Retry Interval.”
Default: 5
787 Modem Retry Interval B
The amount of time in minutes to wait before attempting a retry, following a failed
scheduled or alarm call-in. Often referred to as the secondary retry interval.
Default: 1440, minutes
788 Modem Retry A Count
Number of times that interval A retries
Default: 3
To Next Page
Loading...
